DIN rail mounting transducers available in 55mm x 112mm or 100 x 112mm DIN rail cases
Used to convert various inputs into standard DC signals for driving panel meters and for use in control devices.
The M100-RPN is designed to measure the resistance of 3 wire potentiometers, where the resistance value is proportional to the position of the wiper of the potentiometer. The output value from the M100-RPN is directly proportional to the resistance value at the wiper. A typical application is monitoring remote resistance of potentiometer used in manual valve control.
|Rated range||min. 100 ohms…max. 50 k Ohms|
|Sensor current||min 20uA…max 10mA|
|Sensor Voltage||1 Volt|
|Working Range||0-100% R|
|Rated value mA||1/5/10/20 & 4-20mA|
|Rated value volts||0-5/10 & 1-5V|
|D.C. Voltage||24/48/110V(Â±20% /|
|galvanically isolated / 3W)|
|Approx 0.4kg. 55mm case|
|No isolation is provided between input and output|
|1||Non standard inputs / outputs only as far as technically acceptable|
|2||A.C. Auxiliary in range 57.7 to 450 volts|
|3||Calibration at temperature other than 23ÂºC|