DIN rail mounting transducers available in 55mm x 112mm or 100 x 112mm DIN rail cases
Used to conver various inputs into standard DC signals for driving panel meters and for use in control devices.
|M100-DS1||DC Current 1 input|
|M100-DS2||DC Current 2 inputs|
|M100-DS3||DC Current 3 inputs|
|M100-DS4||DC Current 4 inputs|
The M100-DS series of summation transducer take up to four inputs and provide an output signal directly proportional to the sum of the inputs. A typical application is theÂ summation of total kW of four seperating generating sets e.g. the four individual kW readings are provided by M100-WA4 transducers with 0-1mA output signals.
The M100-DS4 summates the four 0-1mA signals and provides a single output signal that is directly proportional the sum of the total kW of all four generators. It is important to note the following when using summation transducers: to ensure the correct reading is obtained:
The current and voltage ratios must be identical otherwise the subsequent summation will be meaningless.
|Rated value In||Â±1mA 0-1mA…20mA|
|Overload Continuous||4 x In|
|Overload Continuous:||1.5 x Un|
|Rated value mA||0-1/5/10/20 & 4-20mA|
|Load resistance||12/2.4/1.2/0.6 kOhm|
|Rated value volts||0-5 / 10 & 1-5V|
|D.C. Voltage||24/48/110V(Â±20% /|
|galvanically isolated / <3W)|
|Approx 0.4kg. 55mm case|
|1||Non standard inputs / outputs only as far as technically acceptable|
|2||A.C. Auxiliary in range 57.7 to 450 volts|
|3||Calibration at temperature other than 23ÂºC|