Description
DIN rail mounting protection relays for use in single and three phase systems. Available in 55mm x 112mm or 100 x 112mm DIN rail cases
Selection Guide
| M200-PS1 | 3 phase 3 or 4 wire |
Typical Applications
The M200-PS1 provides phase and phase sequence / failure protection. Used to ensure the sequence is correct when connecting 3 phase loads. With an incorrect phase sequence the relay will start to de-energise, preventing the starting of incorrectly connected machinery. The relay will also trip if there is a phase loss and can therefore be used as a phase failure relay.
If regenerated voltage voltage is present in the open phase the M200-PB1 or M200-PB2 should be used. The red LED “On” indicates phase sequence incorrect and relay is de-energised.. The green LED “On” indicates phase sequence correct and relay is energised.
Technical Specifications
| INPUT | |
| Rated value Un | 57.8 < 500V ±25% |
| Frequency | 50 / 60 / 400Hz |
| Burden | <3VA |
| Overload | 1.5 x continuous 2 x Un 3 seconds |
| SETPOINT | Not adjustable |
| AUXILIARY | Self Powered |
| WEIGHT&CASE | Approx 0.4kg. 55mm case |
Ordering Information
| Product Code | Input Un | Freq | Options |
| M200-PS1 | 415V | 50Hz | Cal 35ºC |
Connection Diagrams
Call us now on: +44 1922 640003