phase angle transducer, part of the hobut range of transducers

M100-PA1	Single phase 4 quadrants
M100-PA2	3 phase 3 or 4 wire balanced 2 quadrants
M100-PA3	3 phase 3 or 4 wire balanced 4 quadrants
M100-PV1	Single phase 4 quadrants phase angle between
	two voltages.

The M100-PA series of phase angle transducers measure the phase angle between current and voltage. They can be used on single and three phase 3 or 4 wire balanced systems. Ideal for optimising power factor correction. The MP100-PV1 measures the phase angle between two voltage supplies and provides a D.C. output signal proportional to the phase angle between the voltages.

INPUT
Rated value In	1 or 5 Amp C.T. connected 0.5 - 10Amp direct
	connected
Rated value Un	57.8 < 600V
Power Consumption	<1VA voltage (aux powered) < 2.5VA voltage
	(self powered) < 0.2VA current
Working Range	15-125% Un auxiliary powered 75% -125%
	Un self powered 10-150% In
Measuring Range	± 45 / ±-60 / ±90 / ±180ºM100PA1 ±45/
	60ºM100-PA2 ±90 / ±180ºM100-PA3
Rated Frequency	50 / 60 / 400Hz
Frequency Influence	0.005% / Hz
Overload Continuous	4 x In 1.5 x Un
Overload for 1 sec	50 x In 2 x Un
ACCURACY
	± 1º
OUTPUT
Rated value mA:	0-1/5/10/20 & 4-20mA
Rated value volts:	0-5/10 & 1-5V
ADJUSTMENT
Zero:	±2%
Span:	±10%
AUXILIARY
A.C. Voltage	115/230/400V(±25% / 45-65Hz / < 2VA)
D.C. Voltage	24 / 48 / 110V(±20%/galvanically isolated/<3W)
WEIGHT&CASE SIZE
	Approx 0.6kg. 100mm case

1	Non standard inputs as far as technically viable
2	A.C. Auxiliary in range 57.7...450 volts
3	Calibration at nominal Hz 35....450Hz
4	Calibration at temperature other than 23ºC

Product Code	I/P In Un	O/P Range	Aux	Freq	Options
M100-PA2	110V ±15%	±45ºc	120V	60Hz