DC Current or Voltage transducer, part of the hobut range of transducers

The M100-DM3 takes 1 DC Input and provides 3 isolated outputs all directionally proportional to the input. The outputs can all be of the same D.C. Value or can be diffrent. Typically this product is used to prevent earth loops between measuring devices. For example the M100-DM3 could have its input signal provided by a M100-WA4 watt transducer with 4-20mA output. The 3 outputs from the M100-DM3 could be as follows:

Output A = 4-20mA fed to a PLC

Output B = 0-20mA fed to an analogue meter scaled in kW

Output C = 1-5V fed to a chart recorder

The isolation between the Input/Output/Case is 1.5kV

and the isolation between each output is 500V

INPUT
Rated value In	±0-1/5/10/20 & 4-20mA
Voltage drop	20mV
Rated value Un	±20mV...10V
Impedance	100kOhm / volt
Working Range	±125% In
Overload Continuous	4 x In
Overload Continuous	1.5 x In
OUTPUT
Rated value mA	0-1/5/10/20 & 4-20mA
Load Resistance	10/2/1/0.5 kOhm
Rated value volts	0-5/10&1-5V
ADJUSTMENT
Zero	±2%
Span	±10%
AUXILIARY
A.C. Voltage	115/230/400V(±25%/45-65Hz/<2VA)
D.C. Voltage	24/48/110V(±20% /
	galvanically isolated / <3W)
WEIGHT&CASE SIZE	Approx 0.4kg. 100mm case
INSULATION
Test Voltage	1.5kV between Input/Output/Case
	500 volt between each output

1	Non standard inputs / outputs as far as technically viable
2	A.C. Auxiliary in range 57.7 to 450 volts
3	Calibration at temperature other than 23ºC

Product Code	Input In	Output	Aux	Freq	Options
M100-DM3	1mA	A=1mA	230V	50Hz
		B=4-20mA
		C=10V